0433 597 205

IQEG ENGINEERING LAB

Engineering lab.

Calculators for the desk. Australian Standards and recognised engineering references are identified within each tool. Indicative — not a certificate.

IQ-CAL-001 — IQ-CAL-015REV 1.06 · INDICATIVENOT A CERTIFICATEDISCLAIMER

Steel · sections · members

IQ-CAL-001
Steel section properties + CADRev 1.03

AU mill properties for the designer. Download DXF / STEP.

OPEN
IQ-CAL-006
Built-up section inertiaRev 1.05

Built-up I from plate. Centroid, Ixx / Iyy, fibre stress P1–P5.

OPEN
IQ-CAL-005
Combined stress on a sectionRev 1.04

N, M and V on a catalogue section. Fibre σ and von Mises.

OPEN
IQ-CAL-007
Beam shear, moment and deflectionRev 1.03

Span and loads. Reactions, V, M, stress, downward deflection.

OPEN

Bolts · welds · groups

IQ-CAL-002
Single-bolt tension and shearRev 1.04

φNtf and φVf for one bolt. Grade, size, threads in or out.

OPEN
IQ-CAL-003
Fillet weld group stressRev 1.05

Weld-line inertia. Stress from N, V, M against φvw.

OPEN
IQ-CAL-008
Bolt torque to pretensionRev 1.04

k-factor torque to proof. AS 4100 Nti.

OPEN
IQ-CAL-009
Bolt gauges on AU sectionsRev 1.05

Gauge, backmark and hole fit on UB / UC / PFC.

OPEN
IQ-CAL-013
Bolt group forcesRev 1.03

Elastic group. Per-bolt N and V from applied N, V, M.

OPEN
IQ-CAL-015
Column base plateRev 1.05

UB, UC and SHS base plate. Bearing, bolts, plate thickness and the fillet weld.

OPEN

Plant · air

IQ-CAL-004
Fan versus system curveRev 1.03

Fan curve against duct resistance. Operating point, pressure, power.

OPEN

Desk · reference

IQ-CAL-010
Engineering quick-reference deskRev 1.03

Bolts, holes, Nti, fillets, AS 1657, keys, fits. Searchable.

OPEN
IQ-CAL-011
Engineering unit conversionRev 1.04

MPa, psi, kN·m, cfm, shaft torque.

OPEN
IQ-CAL-012
Engineering quizRev 1.05

Random questions. Stress, bolts, welds, steel, principles.

OPEN
ENGINEERING NOTE

Indicative calculation only. Not a substitute for project-specific engineering design to the applicable Standards and not certified engineering advice.

IQ ENGINEERING GROUP

Bring the problem.
We will say what the job is.