IQEG / ENGINEERING LAB
Beam shear, moment and deflection

IQEG CALCULATION LAB
Beam shear, moment and deflection
IQ-CAL-007 · Rev 1.03 Indicative · 17/11/2026 · Not a certificate
IQ Engineering Group · Sydney · IQ-CAL-007 · Beam shear, moment and deflection · millimetres, kN, kNm, MPa unless noted
Layout
Glossary
- δ
- Vertical deflection of the elastic curve. Positive up. Downward deflection is negative so the plot is the actual beam shape.
- Query x
- Station on the elevation and on V / M / σ / δ. Reports δ, V, M, θ and σ at that x. Not a support.
- σ
- Bending stress M / Zxx. Catalogue Z when the mill box is on. Indicative — not a member check.
- E
- Young’s modulus. Default 200 GPa for steel.
Supports (max 4)
Point loads (+down / −up)
UDL (+down / −up)
Elevation · elastic curve · query x = 3.00 m
Supports A pin @ 0.00 m · B roller @ 6.00 m. Grey line is the deflected shape (δ +up, down negative).
SHEAR V — kN (V = dM/dx)
MOMENT M — kNm (sagging +)
STRESS σ — MPa (M / Zxx)
DEFLECTION δ — mm (+up, down −)
Ra = Rb = wL / 2
M(x) = Ra x − w x² / 2 Mmax = w L² / 8 at mid-span
δ +up. Down is negative. δmax = −5 w L⁴ / 384 EI
V(x) = Ra − w x (= dM/dx)
Results
QUERY · AT x = 3.00 m
δ -6.88 mm · V 0.0 kN · M 36.0 kNmθ 0.0000 rad · 0.0° · σ 56.3 MPa
310UB46.2 · Ixx 98.1×10⁶ mm⁴ (fillets omitted) · fy 300 MPa. Mill tables govern.
0433 597 205